Ea pele, litšobotsi:
1, Matla a phahameng, boima bo phahameng, khanyetso e phahameng ea creep, torque e phahameng: e sebetsang ho lisebelisoa tsa liphaephe, manonyeletso, 'mele ea valve, joalo-joalo ka likhoele tse ling tsa ka hare bakeng sa tšehetso le tšireletso.
2, ho hanyetsa mocheso o phahameng, ho hanyetsa hydrolysis, ho hanyetsa UV: lisebelisoa tsa bongaka le likarolo tse loketseng ho pheha mocheso o phahameng le sterilization ea ultraviolet.
3, matla a khoheli a manyane le sebopeho se bonolo: hobane PPS e na le matla a khoheli a manyane, mokhoa oa ho bopa ente o bonolo ebile o sebetsa hantle, mme o ka nka sebaka sa lisebelisoa tsa tšepe tse kang alloy ea aluminium, alloy ea koporo le tšepe e sa hloekang, e ka fokotsang litšenyehelo tsa sehlahisoa haholo. , ntlafatsa katleho ea mosebetsi, le ho boloka litšenyehelo tsa ho sebetsa.
4 、 Self-flame retardant: e na le lelakabe la eona la V0 le thibelang lelakabe, ha ho hlokahale hore e kenye ntho leha e le efe e thibelang lelakabe, le ho itima mollo. E ka hlahisa lisebelisoa tsa liphaephe tse nang le litlhoko tse thibelang mollo kapa litlhoko tsa tšireletso ea mollo
Ea bobeli,themohlala oa tšebeliso:
Thermostatic valve, Solar water mixing valve, Hardware sanitary ware, Faucet, kamore ea metsi a koloi, joalo-joalo.
Ea boraro, papiso ea ts'ebetso ea PPS le PPSU:
| Lintho tsa Tlhahlobo | Yuniti | Mokhoa oa ho Leka | Tshebetso | |
| PPS | PPSU | |||
| Botenya | g/cm3 | ISO 1183 | 1.8 | 1.3 |
| Ho honyela ha hlobo | % | ISO294-4 | 0.4 | 0.9 |
| Ho qhibiliha sekhahla sa phallo | g/10 mets | ISO 1133 | 55 | 15 |
| Mongobo oa Mongobo | % | ISO62 | 0.02 | 0.37 |
| Matla a tšepe | MPa | ISO527-1,2 | 150 | 75 |
| Elongation at Break | % | ISO527-1,2 | 1.3 | 7.8 |
| Flexural Matla | MPa | ISO178 | 230 | 105 |
| Flexural Modulus | MPa | ISO178 | 14000 | 2400 |
| Izod Impact, Notched | KJ/m2 | ISO 1791eA | 12 | 65 |
| Mocheso oa ho Fetola Mocheso (1.8MPa) | ℃ | ISO75-1,2 | 267 | 207 |
| Bophahamo ba ho hanyetsa × 1015 | Ω.m | IEC60093 | 5 | 5 |
| Matla a dielectric 1MHz | / | IEC60250 | 4 | 4 |
| Matla a motlakase | KV/mm | IEC60243-1 | 15 | 15 |
| Ho lieha ha lelakabe | / | UL94 | V-0 | V-0 |
Joalokaha ho ka bonoa tafoleng e kaholimo, PPS e na le:
Better dimensional stability: deformation e tlase ea likarolo tlas'a maemo a chesang le a batang a fapanyetsanang
Ho monyela ha metsi ka tlase: sekhahla sa ho monya metsi se tlase, nako e telele ea ho tsofala ha sehlahisoa Matla a phahameng le modulus: tšehetso e matla le ts'ireletso.
Ho hanyetsa mocheso o phahameng: ts'ebetso e ntle ea ho tsofala ha mocheso
Ntle le moo, PPS e na le bokhoni bo betere ba ts'ebetso, matla a tlase a ts'ebetso le litšenyehelo tse tlase tsa thepa.
Nako ea poso: 25-08-22